行业资讯
路拌机是如何进行工作的？
来源：https://www.sddhfjx.com/ 日期：2023-06-30
稳定土拌和机俗称：路拌机，是一种自行式全液压稳定土拌和设备，可对二灰土、二灰碎石、水稳沙砾等各种不同配比材料进行就地拌和，并可对旧沥青路面进行铣刨。那么路拌机是如何进行工作的？下面冷再生机租赁厂家为您讲解：
The stabilized soil mixer, commonly known as the road mixer, is a self-propelled fully hydraulic stabilized soil mixing equipment that can mix various materials with different proportions such as lime soil, lime crushed stone, water stabilized sand and gravel on site, and can also mill old asphalt pavement. So how does the road mixer work? Below, the manufacturer of the cold regeneration machine rental will explain to you:
行走与拌和转子的驱动均为全液压闭式回路。行走速度与拌和转子转速均可实现无级变速辅助系统（转向、拌和转子升降、尾门开闭）均为液压操纵。
The driving of both the walking and mixing rotors is a fully hydraulic closed circuit. Both the walking speed and the mixing rotor speed can achieve stepless speed change assistance systems (steering, mixing rotor lifting, tailgate opening and closing), all of which are hydraulically operated.
通过压力自动补偿装置（POR系统）实现功率自动分配仪表面板布置合理，全面显示工作状态带防翻保护架的密封式驾驶室、豪华型司机座椅，并配带空调设备，以改善驾驶员的作业环境低压宽基人字形花纹驱动轮胎，抗振性能优良。
By using the pressure automatic compensation device (POR system) to achieve power automatic distribution, the instrument panel layout is reasonable, fully displaying the working status of the sealed cab with anti roll protection frame, luxury driver seat, and equipped with air conditioning equipment to improve the driver's working environment. Low pressure wide base herringbone pattern drive tires have excellent vibration resistance performance.
附着牵引力大整体式前桥及SOMA后桥可靠性高大滚筒工作转子，提高了工作效率，确保了拌和质量，并可根据用户需要配置水喷洒装置及铣刨转子。
The integrated front axle and SOMA rear axle have high reliability and high drum working rotor, which improves work efficiency and ensures mixing quality. Water spraying devices and milling rotors can be configured according to user needs.
此外在进行路拌机维修的时候，应该注意：
In addition, when repairing the road mixer, attention should be paid to:
(1)检查路拌机有无伤痕和锈蚀现象，必要时应更换新品。
(1) Check the road mixer for scratches and rust, and replace it with a new one if necessary.
(2)检查路拌机副配合情况。将柱塞端头插人柱塞套内，倾斜约60°，若柱塞能在自身作用下缓慢地下滑为配合良好。
(2) Check the coordination of the road mixer. Insert the end of the plunger into the plunger sleeve and tilt it at about 60 °. If the plunger can slowly slide under its own action, it is considered a good fit.
(3)检查路拌机柱塞副的密封性。用手握住柱塞套，两个手指堵住柱塞顶端和侧面的进油口。用另一只手拉出柱塞，感到有较大的吸力，放松柱塞立即缩回原位，表明柱塞副密封良好，否则应更换柱塞副。
(3) Check the sealing of the plunger pair of the road mixer. Hold the plunger sleeve with your hand and block the oil inlet at the top and side of the plunger with two fingers. Pull out the plunger with the other hand and feel a strong suction. Release the plunger and immediately retract it back to its original position, indicating that the plunger pair is well sealed. Otherwise, the plunger pair should be replaced.
(4)检查出油阀副减压环带是否磨损有台阶或伤痕现象，必要时应予以更换。
(4) Check if the pressure reducing ring of the oil outlet valve is worn, stepped or scratched, and replace it if necessary.
若是一些自己无法解决的故障问题，在没有完全把握解决故障的情况下，澳托士建议尽量寻找专业的维修厂家https://www.sddhfjx.com，以免自己动手造成不必要的损失。
If there are some fault problems that cannot be solved by oneself, and we are not fully confident in solving the problem, Austros recommends seeking professional repair manufacturers as much as possible https://www.sddhfjx.com To avoid unnecessary losses caused by hands-on actions.
公司地址：济南市槐荫区经一路273号群盛华城2号楼1-404
公司名称：山东途畅路桥工程有限公司 
备案号：