行业资讯
路全深度翻新的最佳选择是冷再生机
来源:https://www.sddhfjx.com/ 日期:2022-11-23
冷再生机应用自动深度控制装置。负荷控制装置,使发动机的速度被保持在峰值扭矩,以维持高的产率。四种转向模式丰富的机移动性。有三个转子的选择:粉通用转子专用沥青层;切碎的功能和转子的两个组合的稳定性;和两个专用土壤稳定转子不同的土壤类型。
The cold regenerator shall be equipped with automatic depth control device. The load control device keeps the engine speed at the peak torque to maintain high production rate. The four steering modes provide rich mobility. There are three options for rotors: asphalt layer for powder general rotor; Chopping function and stability of two combinations of rotors; And two special soil stabilizing rotors.
道路冷再生工艺优势比就地冷再生技术的道路路面维修改造传统方法具有无可比拟的优势。
The advantages of road cold recycling technology are incomparable compared with the traditional methods of road pavement maintenance and reconstruction of in situ cold recycling technology.
1,成本低,根据海外引入的工程信息,与旧的层压材料新的覆盖方法相比,就地冷再生租赁能的约20%的成本降低到46%。
1. The cost is low. According to the engineering information introduced overseas, compared with the new covering method of the old laminated material, the cost of leasing energy for cold recycling in place is reduced from about 20% to 46%.
2,提高老路的水平,我们可以提高基层的承载能力,改善道路,实现从根本上,这是低等级公路,特别是有特殊的含义。
2. To improve the level of the old roads, we can improve the bearing capacity of the grassroots, improve the roads, and fundamentally, this is a low-grade highway, especially with a special meaning.
3,厚度均匀的结构完整性,从而导致冷回收店内层,有有时可见之间没有淡薄接口覆盖传统的施工方法。
3. The structural integrity with uniform thickness leads to the fact that there is sometimes no thin interface between the inner layers of the cold recovery shop to cover the traditional construction methods.
4,路基无损伤,仅通过一次由于一次性冷再循环做法,在暴露的路基再生单元。与传统的施工方法,对路基的损伤较小相比。
4. There is no damage to the subgrade, and the exposed subgrade is regenerated only once due to one-time cold recycling. Compared with the traditional construction method, the damage to the subgrade is less.
5,节约材料,所有的旧料全部帘布本地使用,从而大大降低了新材料,以保护资源量。
5. Save materials. All the old materials are used locally, which greatly reduces the new materials and protects the resources.
6,建设周期短,因为那里是老材料的任何运输问题,旧机器和目标上没有任何其他材料碎散,不需要专门的散装物料拆除和破碎,更重要的是,一次性操作的特点施工过程大大简化了施工工艺,节省了施工时间。
6. The construction period is short, because there is no problem in the transportation of old materials. No other materials are broken on the old machines and targets, so there is no need to dismantle and break special bulk materials. More importantly, the one-time operation features that the construction process greatly simplifies the construction process and saves construction time.
7,冷再生保护环境,因为使用旧物大大降低新材料的开发,没有运输和堆放旧物的问题,以符合环保要求的根本。
7. Cold recycling protects the environment. Because the use of old materials greatly reduces the development of new materials, there is no problem of transporting and stacking old materials, so as to meet the fundamental environmental requirements.