行业资讯
冷再生机作业时的一些情况你知道吗?
来源:https://www.sddhfjx.com/ 日期:2020-11-18
冷再生机一次破碎拌合宽度为2.4米,工作时经常会有一辆水罐车紧跟作业保证拌合用水,拌合过程中按照试验单所规定的高于平时含水量,除此之外还需要有一辆水罐车需满水随时处于待命状态,一旦跟再生机作业的水罐没水了,需即刻补上。
The width of one-time crushing and mixing of cold regenerator is 2.4 meters. When working, there is often a water tank car closely following the operation to ensure the mixing water. During the mixing process, according to the water content specified in the test sheet, it is necessary to have a water tank truck full of water and be on standby at any time. Once the water tank following the regenerator runs out of water, it needs to be replenished immediately.
冷再生机出租的时候需要进行对再生混合料拌,应立即用平地机初步整形。在直线和不设超高的平曲线段,平地机由路肩向路中心进行刮平。很多冷再生机出租的时候,都会面对这点,对路面的整形过程中应及时消除粗细料离析现象。既由人工配合机械把大块没有破碎掉的旧路料清除掉。冷再生机租赁时候一般行走比较困难,则需先由冷再生机对旧路面层进行铣刨后,在破碎料上再铺水泥,进行冷再生拌合施工。
When the cold recycling machine is rented, the recycled mixture needs to be mixed, and the grader should be used for preliminary shaping immediately. In straight lines and flat curved sections without superelevation, the grader scrapes from the shoulder to the center of the road. Many cold recycling machine rental, will face this point, the road surface shaping process should be timely eliminate the segregation of coarse and fine materials. On the other hand, the old road material which has not been broken is removed by manual and mechanical means. Generally, it is difficult to walk when the cold recycling machine is rented, so it is necessary to mill the old pavement layer by the cold recycling machine, and then pave cement on the crushed materials for cold recycling mixing construction.
以上是关于冷再生机路面作业的一些常见情况,如您想要了解更多资讯内容请点击网站,冷再生机租赁http://www.sddhfjx.com。
The above are some common situations about the cold recycling machine road operation. If you want to know more about the content, please click the website, cold recycling machine leasing http://www.sddhfjx.com 。