公司新闻
冷再生机租赁分享冷再生在道路维修特点有哪些？
来源：https://www.sddhfjx.com/ 日期：2020-08-17
冷再生机在道路施工要求是非常高的，是要达到其结构寿命时就会产生深层裂缝、坑洞及拥包等损坏，从而导致道路使用性能的严重下降。作为一种经济性的道路维修改造方法，就地冷再生的主要优点是百分之百地利用旧材料使现有铺层得到加强，加强需要进行基础的打牢，其次有工期短、对公共交通干扰小等优点，而且与其他维修方法相比，就地冷再生的成本会大大的降低很多，从而节省更多的人力，物力！
Cold recycling machine in road construction requirements is very high, is to reach its structural life, will produce deep cracks, holes and bags and other damage, resulting in serious decline in road performance. As an economic method of road maintenance and reconstruction, the main advantage of cold in place recycling is to make full use of old materials to strengthen the existing pavement, and the reinforcement needs to lay a solid foundation. Secondly, it has the advantages of short construction period and small interference to public transportation. Moreover, compared with other maintenance methods, the cost of cold in place recycling will be greatly reduced, thus saving more people Force, material force!
冷再生机租赁的时候，都是具有针对性的，还一直采用修新路用的传统设备，以传统的重建方式进行。尽管这种方法可以保证质量，但显得过于笨重、工期过长，特别是不能不断交施工。更由于不能充分利用现有路面材料，不仅成本很高，也不环保。由于环保及经济的原因，尽可能多地利用现有路面铺层材料进行道路维修。
When the cold regenerator is leased, it is targeted, and the traditional equipment used to repair new roads has been adopted, and the traditional reconstruction method is used. Although this method can ensure the quality, it is too cumbersome, too long construction period, especially can not be handed over continuously. Moreover, due to the failure to make full use of the existing pavement materials, it is not only costly, but also environmentally friendly. Due to environmental protection and economic reasons, the existing pavement paving materials should be used as much as possible for road maintenance.
首先是根据现有路面铣刨到确定的深度，以便获得现有铺层材料。然后，通过加入粘结剂对这些材料进行再生处理，从而获得一个得到加强的新铺层。整个再生过程是一个一次性的过程。现在，已经有成熟的集现代工程机械新技术于一身的再生机械，现在，就地冷再生作为一种旧路维修改造方法，已经在世界上各国得到广泛承认。这一工艺适用于维修或升级改造从无铺面的砾石路，到承受重负荷的干线公路的大范围的道路。
First, the existing pavement is milled to a certain depth to obtain the existing pavement material. Then, these materials are regenerated by adding binders to obtain a new strengthened layer. The whole regeneration process is a one-off process. At present, there are mature recycling machinery integrating modern construction machinery and new technology. Now, as a method of old road maintenance and transformation, cold in place recycling has been widely recognized in the world. This process is suitable for maintenance or upgrading of a wide range of roads from unpaved gravel roads to heavily loaded trunk roads.
以上是关于冷再生机道路维修的一些特点，希望对大家有所帮助，如您想了解更多相关内容欢迎点击冷再生机租赁http://www.sddhfjx.com网站。
The above is about some characteristics of cold regenerator road maintenance, hope to help you, if you want to know more about the relevant content, welcome to click on the cold regenerator rental http://www.sddhfjx.com Website.
公司地址：济南市槐荫区经一路273号群盛华城2号楼1-404
公司名称：山东途畅路桥工程有限公司 
备案号：