影响路面铣刨机滑转率的因素有哪些？_公司新闻_新闻中心-山东途畅路桥工程有限公司

公司新闻

影响路面铣刨机滑转率的因素有哪些？

来源：https://www.sddhfjx.com/ 日期：2023-09-08

传统铣刨机租赁后的基本使用工况：

The basic usage conditions of traditional milling machines after leasing:

第一、高速铁路箱梁表面铣磨、磨平，底板超高面积被铣平作业。

Firstly, the surface of high-speed railway box beams is milled and flattened, and the ultra-high area of the bottom plate is milled and flattened.

第二、混凝土混凝土桥在普通主要防水层表面处理凿毛的工艺处理。

Secondly, the process of roughening the surface of the ordinary main waterproof layer for concrete bridges.

第三、沥青路面涌出，出现网裂的情况，坑槽部分及时铣刨干净。

Thirdly, if the asphalt pavement bursts and there are mesh cracks, the potholes should be promptly milled and cleaned.

第四、在新的沥青混凝土之前，原路的粉碎和粗糙度。

Fourthly, the crushing and roughness of the original road before the new asphalt concrete is added.

第五、道路线路，油漆工厂地板和完全去除各种热熔融材料。
冷再生机租赁

Fifth, road routes, paint factory floors, and completely remove various hot melt materials.

冷再生租赁后开始施工时，由于轮胎和涂层之间的正常摩擦，铣床的工作速度越快，其工作速度越快。因此，其使用阻力自然会增加，摩擦会更加严重，最后铣床的滑动速度会更高。控制铣刨床的工作速度可以导致控制滑动系数的最终效果。

When starting construction after the cold regeneration lease, due to normal friction between the tire and coating, the faster the milling machine operates, the faster its working speed. Therefore, its use resistance will naturally increase, friction will become more severe, and ultimately the sliding speed of the milling machine will be higher. Controlling the working speed of the milling machine can lead to the ultimate effect of controlling the sliding coefficient.

从理论上来说，增大附着力能够提高粘着的基本性能，降低滑移损失。但是倘若附着力过大，则会增加轮胎的磨损程度，甚至很可能会造成打滑的现场。因此，适当增加粘着重力能够在一定程度上减少转差带来的损失。

In theory, increasing adhesion can improve the basic performance of adhesion and reduce slip loss. However, if the adhesion is too large, it will increase the degree of tire wear and may even cause slipping on site. Therefore, appropriately increasing adhesive gravity can to some extent reduce the losses caused by slip.

本文由冷再生机租赁供技术支持，更多的详细精彩内容请点击我们的网站https://www.sddhfjx.com我们将会全心全意为您提供满意的服务。

This article is provided for technical support by leasing cold recycling machines. For more detailed and exciting content, please click on our website https://www.sddhfjx.com We will wholeheartedly provide you with satisfactory service.

上一条：水泥就地冷再生施工控制要点

下一条：撒布机有什么特点？