公司新闻
铣刨机租赁的分类介绍
来源：https://www.sddhfjx.com/ 日期：2023-02-25
般路面铣刨机是沥青路面养护施工的设备，主要作用于清除马路和城市道路沥青混凝土表面产生的凹凸、油浪、网纹、车辙等瑕疵表面。将损坏的旧路面磨平再铺设新路面，是最经济、最现代化的养护方法之一。
General pavement milling machine is the equipment for asphalt pavement maintenance and construction, which is mainly used to remove the concave-convex, oil wave, mesh, rut and other defects on the asphalt concrete surface of roads and urban roads. It is one of the most economical and modern maintenance methods to smooth the damaged old pavement and then pave the new pavement.
由于其设备工作效率高，施工工艺简单，铣削深度易控制，冷再生租赁之后操作方便灵活，操作性好，碾磨旧材料直接回收，在城市市政道路和高速公路养护工程中得到广泛应用。
Due to its high working efficiency, simple construction process, easy control of milling depth, convenient and flexible operation after cold regeneration lease, good operability, and direct recycling of grinding old materials, it has been widely used in urban municipal roads and highway maintenance projects.
根据铣削的形式，区分成冷铣式和热铣式。冷铣型具有功率大、刀具磨损快、切削材料粒径均匀等特点。它可以配备洒水装置来喷水，应用广泛。产品已成为一个系列，由于增加了加热装置，热铣型更为复杂，通常用于道路再生。
According to the form of milling, it can be divided into cold milling and hot milling. The cold milling type has the characteristics of high power, fast tool wear and uniform cutting material particle size. It can be equipped with sprinklers to spray water, and is widely used. The product has become a series. Due to the addition of heating device, the hot-milling type is more complex and is usually used for road regeneration.
依照铣转子的旋转方位，划分为顺铣式还有逆铣式。在铣床运行时，转子的旋转方向与砂轮的旋转方向相同，为正铣型，反之为反铣型。
According to the rotation direction of the milling rotor, it can be divided into forward milling and reverse milling. When the milling machine is running, the rotation direction of the rotor is the same as that of the grinding wheel, which is the forward milling type, and vice versa.
根据铣转子的位置，划分成后悬挂式、中间悬挂式和后桥同轴式。后悬架类型是铣削转子悬挂在后桥后部;中间悬挂类型是铣削转子在前后轴之间;后桥同轴类型是铣削转子与后桥同轴布置。
According to the position of milling rotor, it is divided into rear suspension type, middle suspension type and rear axle coaxial type. The rear suspension type is milling rotor suspended at the rear of the rear axle; The middle suspension type is milling the rotor between the front and rear axles; The coaxial type of rear axle is the coaxial arrangement of milling rotor and rear axle.
根据铣转子的工作宽度，可分为小、中、大三种类型。小型铣刨机的铣刨宽度为300-800mm，铣刨转子的驱动操作以机械为主，特别适用于占地面积小于100m2的地面加工;中型铣床的铣刨宽度为1000-2000mm，铣刨转子的驱动操作以液压为主大型铣床的铣削宽度大于2000mm，一般与其它机床配合使用，用于石膏的仿形，铣床的传动方式以液压传动为主。
According to the working width of the milling rotor, it can be divided into three types: small, medium and large. The milling width of the small milling machine is 300-800 mm, and the driving operation of the milling rotor is mainly mechanical, especially suitable for ground processing with an area less than 100 m2; The milling width of the medium-sized milling machine is 1000-2000mm. The driving operation of the milling rotor is mainly hydraulic. The milling width of the large milling machine is more than 2000mm. It is generally used in conjunction with other machine tools for gypsum profiling. The driving mode of the milling machine is mainly hydraulic.
还有依据传动方式又能分为机械式和液压式。铣刨机租赁公司的工程说到：机械工作可靠，维修方便，传动效率高，制造成本低，但结构复杂，操作不轻，运行效率低，牵引力小，适用于浅路堑的小型路面维修工作;液压式结构紧凑，轻便、柔性、牵引力大，但制造成本高，维修困难，适用于中、大型路堑和路面的深度养护。
It can also be divided into mechanical type and hydraulic type according to the transmission mode. The project of the milling machine leasing company said: the machine works reliably, is convenient for maintenance, has high transmission efficiency, and low manufacturing cost, but has complex structure, light operation, low operating efficiency, and low traction, which is suitable for small pavement maintenance work of shallow cutting; The hydraulic type has compact structure, portability, flexibility, and great traction, but it has high manufacturing cost and is difficult to maintain. It is suitable for deep maintenance of medium and large cutting and pavement.
公司地址：济南市槐荫区经一路273号群盛华城2号楼1-404
公司名称：山东途畅路桥工程有限公司 
备案号：