公司新闻
冷再生机道路维修特点有哪些？
来源：https://www.sddhfjx.com/ 日期：2021-05-26
冷再生机在道路施工要求是非常高的，是要达到其结构寿命时就会产生深层裂缝、坑洞及拥包等损坏，从而导致道路使用性能的严重下降。作为一种经济性的道路维修改造方法，就地冷再生的主要优点是百分之 百地利用旧材料使现有铺层得到加强，加强需要进行基础的打牢，其次有工期短、对公共交通干扰小等优点，而且与其他维修方法相比，就地冷再生的成本会大大的降低很多，从而节省更多的人力，物力！
The requirement of cold recycling machine in road construction is very high. It will produce deep cracks, pits and other damage when it reaches its structural life, which will lead to the serious decline of road performance. As an economical method of road maintenance and reconstruction, the main advantages of on-site cold recycling are to make full use of old materials to strengthen the existing pavement, strengthen the need to lay a solid foundation, and then have the advantages of short construction period and small interference to public transport. Moreover, compared with other maintenance methods, the cost of on-site cold recycling will be greatly reduced, So as to save more manpower and material resources!
冷再生机施工的时候，都是具有针对性的，还一直采用修新路用的传统设备，以传统的重建方式进行。尽管这种方法可以保证质量，但显得过于笨重、工期过长，特别是不能不断交施工。更由于不能充分利用现有路面材料，不仅成本很高，也不环保。由于环保及经济的原因，尽可能多地利用现有路面铺层材料进行道路维修。
Cold recycling machine construction, are targeted, but also has been used to repair the traditional road equipment, in the traditional way of reconstruction. Although this method can ensure the quality, it is too cumbersome and the construction period is too long, especially the continuous delivery of construction. Moreover, due to the failure to make full use of the existing pavement materials, the cost is not only high, but also not environmentally friendly. Due to environmental and economic reasons, the existing pavement materials should be used as much as possible for road maintenance.
冷再生机施工的时候，首先是根据现有路面铣刨到确定的深度，以便获得现有铺层材料。然后，通过加入粘结剂对这些材料进行再生处理，从而获得一个得到加强的新铺层。整个再生过程是一个一次性的过程。现在，已经有成熟的集现代工程机械新技术于一身的再生机械，现在，就地冷再生作为一种旧路维修改造方法，已经在世界上许多国家得到广泛承认。这一工艺适用于维修或升级改造从无铺面的砾石路，到承受重负荷的干线公路的大范围的道路。
During the construction of cold recycling machine, the first step is to mill to a certain depth according to the existing pavement, so as to obtain the existing pavement materials. Then, these materials are recycled by adding binder, so as to obtain a strengthened new layer. The whole regeneration process is a one-time process. Now, there is a mature set of modern construction machinery in a new technology of recycling machinery, now, cold in place recycling as a method of old road maintenance and transformation, has been widely recognized in many countries in the world. This technology is suitable for the maintenance or upgrading of a wide range of roads from unpaved gravel roads to trunk roads with heavy load.
以上是关于冷再生机道路维修的一些特点，大家如有跟多的疑问欢迎到我们公司咨询。
The above is about some features of cold recycling machine road maintenance, if you have more questions, welcome to our company for consultation.
公司地址：济南市槐荫区经一路273号群盛华城2号楼1-404
公司名称：山东途畅路桥工程有限公司 
备案号：