冷再生的不同之处！_行业资讯_新闻中心-山东途畅路桥工程有限公司

行业资讯

冷再生的不同之处！

来源：https://www.sddhfjx.com/ 日期：2021-03-31

1，成本低

1. Low cost

据介绍外国建筑材料，与旧层压材料新的覆盖方法相比，就地冷再生能的约20％的成本降低到46％。

According to the introduction of foreign building materials, compared with the new covering method of old laminated materials, the cost of in-situ cold regeneration energy is reduced from about 20% to 46%.

2，完善的老路级

2. Perfect old road level

通过增加基层的承载能力，改善道路，实现从根本上，这是低等级公路，特别是有特殊的含义。

By increasing the bearing capacity of the grass-roots, improve the road, fundamentally, this is a low-grade highway, especially has a special meaning.

3，结构完整性

3. Structural integrity

由冷再生生产制服厚层压板，也有时可见之间没有淡薄接口覆盖传统的施工方法。

Sometimes it can be seen that there is no thin interface between uniform thick laminates produced by cold recycling to cover the traditional construction method.

4，不损伤路基

4. No damage to subgrade

由于一次性冷再生实践，再生单元就暴露路基通过一次。与传统的施工方法，对路基的损伤较小相比。

Due to the practice of one-time cold regeneration, the regeneration unit will expose the subgrade to pass once. Compared with the traditional construction method, the damage to the subgrade is smaller.
冷再生机出租

5，节省材料

5. Save materials

所有旧的局部使用的所有材料层，从而大大降低了新材料，以保护资源的量。

All the old parts use all the material layers, thus greatly reducing the amount of new materials to protect resources.

6，施工周期短

6. Short construction period

由于在旧料无运输问题，旧机器和目标上没有任何其他材料碎散，删除不需要的散装物料破碎化，专业化，更重要的是，一次性操作施工过程中的特点大大简化了施工过程中，从而节省了施工时间。

Because there is no transportation problem in the old materials, and there is no other materials scattered on the old machines and targets, it is necessary to delete the unnecessary bulk materials, fragmentation and specialization. More importantly, the characteristics of one-time operation in the construction process greatly simplify the construction process, thus saving the construction time.

7，保护环境

7. Environmental protection

因为对于使用旧的材料大大降低新材料的开发，没有交通和旧材料的堆放问题。符合环保要求的根本。

Because for the use of old materials greatly reduce the development of new materials, there is no traffic and old material stacking problems. Meet the fundamental requirements of environmental protection.

感谢您的阅读，希望以上内容对您有所帮助，如您想了解更多精彩内容请多多关注我们的网站。

Thank you for reading, I hope the above content is helpful to you, if you want to know more wonderful content, please pay more attention to our website.

上一条：什么是冷再生材料成形？

下一条：冷再生技术质量检查程序是什么?